Dirt Devil vacuum cleaners are highly appreciated by customers around the world. However, they can be quite tricky to take apart if you want to give them a good cleaning. In today’s guide, we’ll walk you through how to take apart a Dirt Devil vacuum cleaner without stressing out. Do note that the steps we’ll be presenting are suitable for upright units made by Dirt Devil. That being said, let’s dive into all the Dirt Devil Featherlite disassembly details.
Step-by-step – How to Take Apart a Dirt Devil Vacuum Cleaner
Before you learn how to take apart a Dirt Devil vacuum cleaner, you need to make sure you have a certain tool ready. The only item you’ll need is a #2 Phillips screwdriver, so grab it prior to starting. Without further ado, see how to clean Dirt Devil bagless vacuum cleaners in the 6 steps provided below.
Step 1. Remove External Battery
Depending on what specific upright Dirt Devil you have, you first must remove its power supply. Most models have an external battery, also known as a power brick. You should be able to locate it on one of the vacuum’s sides. Pull the battery out and set it to the side for the time being.
Step 2. Disconnect Handle
When going through how to take apart a Dirt Devil vacuum cleaner, you should know that the main step could get messy. Before removing the handle, either cover the floor area you’re working on or continue the process outside. Lay the vacuum on its side so the handle attachment faces upwards. Turn the collar counterclockwise and pull out the handle.
Step 3. Unscrew Sections
Turn the handle to the side where you can see a screw. Using your #2 Phillips screwdriver, take out the screw and put it somewhere it won’t get lost. We recommend using a small container for temporarily storing the rest of the screws you’ll be removing from the Dirt Devil. Disconnect the two sections by gently pulling them apart.
Step 4. Release Canister
Every Dirt Devil vacuum cleaner has a special button for releasing the dirt cup. Hold the canister with one hand and, with the other, push the button. The cup will easily come off the vacuum after that. Pull out the filter and take the canister to a garbage can and empty the contents. Once you have cleared the cup, rinse it with cold water until it’s clean.
Step 5. Remove Metal Plate
Set the Dirt Devil back on the floor with the brush head facing up. Grab your screwdriver and unscrew the necessary sections on both sides of the roll. After removing the screws, place them in the container or the other object you used for storing the handle screw. Now that the head is unscrewed, tug the metal plate from the bristles.
Step 6. Pull off Brush Head
To completely take off the brush head, remove the screws that are on the frame. Likewise, store the screws safely for when you want to reassemble the unit. You can now pull the section off and proceed with cleaning all of the parts. Please remember to let all of the components air dry entirely before putting the Dirt Devil vacuum cleaner back together again.
Conclusion
Overall, learning how to take apart a Dirt Devil vacuum cleaner isn’t nearly as difficult as you’d expect. Indeed, it may be a bit more complicated than with other brands, but anyone can get the job done. Before concluding, we wanted to help you access additional resources like how to unclog a Dirt Devil vacuum or potential Dirt Devil vacuum not suctioning causes. You can also find Dirt Devil manuals online on the company’s website.
If you have any other tips on how to take apart a Dirt Devil vacuum cleaner, don’t hesitate to share them with other readers below!
Leave a Reply